We do sell replacement jack parts including the main screw like the one shown in your photo. Examples of these replacement jack screws are # TJD-12000-RODNUT, # BD500250 and # BD500217 which are shown on the linked page.
Unless you can positively identify the model of Fulton jack you have I strongly recommend replacing the whole jack instead of trying to rebuild the old one. You may even save money by getting a new jack; you'll also get a new warranty and have the confidence of knowing... view full answer...
I'd recommend sticking with what you've got currently. If the shocks feel a little light they may be worn and need replacing.
The 052-003-00 part number you gave comes back to a part number from Dexter Axle, and while we do not carry a direct replacement we still may have something for you.
If the axle the shock goes to is 2 3/8" in diameter and has a 3.5K capacity, then the Lippert Standard Replacement Shock # LC283271 would work great as a replacement. view full answer...
Yes you can convert your A and E manual awning to a 12 volt power awning with the Solera 12V Power RV Awning Conversion Kit # LC434724 that you referenced. This comes with everything needed to make the conversion and is perfectly compatible with your current awning and roller. view full answer...
The tallest spring hangers we have in a 9/16 eye diameter are the Redline item # E4139 you were looking at. If you want to go to the 5 7/16 inch hanger you were referencing you will need to upgrade to 3/4 eye diameter leaf springs. If you decide to upgrade your leaf springs to use the taller hanger please email me and I would be happy to make a recommendation. view full answer...
I was able to find that your camper came with ST235/80R16E tires but they don't give me any manufacturer information on your factory wheels. I believe they used Lions Head wheels but can't confirm. The wheels will be a zero offset, so I've linked the page to all your aluminum options to assist.
We have some options that come with the tire, so I've linked the page to aluminum wheels with your tire size to assist. The Westlake ST235/80R16 Radial Tire w 16" Bobcat Aluminum Wheel - 8 on... view full answer...
We have two lengths of 5th wheel skirt, 236-inch and 266-inch, and the smallest of these is Adco's model # 290-3501. This cover is approximately 19-1/2 feet long. This will reach around the sides of the Salem Hemisphere 337BAR with about 5-1/2 feet on each side and should cover some part of the forward storage compartment doors on both sides.
It really comes down to your preference for how much side coverage you want, but I think the 236-inch # 290-3501 is the best option. You can always... view full answer...
We do have replacement awning motors for Solera RV awnings with the part # LC373566. It sounds like this is what you are looking for. view full answer...
The only difference between the # AKHD-655-6-K and the # AKHD-655-6-EZ-K is the cap that the hub uses. One is a solid cap and the other has a rubber plug that can come off for access to EZ lube fittings. Since you have caps already you could use either hub part number. view full answer...
When installing the Solera 12V Electric RV Awning Conversion Kit # LC434724 you will need to use 14 AWG or larger as necessary to provide 12V minimum at all times at the connection to the LCI-supplied power cable. Since you are running a longer distance, you will want to use the larger 12 gauge wiring like the 12 Gauge # 12-1-1. view full answer...
As long as the width of the frame on your 2011 Forest River Cherokee 235B is between 22 and 68-1/2 inches (measured from outsides) the Adjustable Width Trailer Hitch Receiver for RVs # C13704 will fit and work well for you as it has a 5,000 lb trailer weight and 500 lb tongue weight capacity.
To add a 4-way what you would need is the part # 18252. This is a 72 inch long 4-way connector that comes with quick-disconnects so that it can easily be attached to a trailer's taillight circuits.... view full answer...
Go To Results